Top 10 Most Frequently Asked Questions on HALT & HASS by Aldo Fucinari
Join us for our next webinar! August 1, 2018 8:30-10:30 am Pacific time (California) 2 hours Cost $200 per person Group discounts available.
Over many years of conducting seminars in HALT and HASS, some of the same questions come up time and time again. These questions are also posed when people are just starting to consider the benefits of product ruggedization using the HALT discovery technique. In this two hour webinar, which costs $200, Mr. Fucinari encapsulates lessons learned from Dr. Gregg Hobbs and Chet Haibel as well as his own 16 years of HALT and HASS testing and consulting. No matter what type or category of product that you have these principles will apply.
I don’t like going beyond the product’s specs or the components’ specs. Isn’t that wrong?
In this first segment we will look at the economy of current methods vs. the economy and effectiveness of HALT. A probability of failure chart based on stress levels will be compared with expected field AFR for a product (annual failure rate).
Once my product design is Ruggedized using HALT, why do I ever need to run HASS?
The instructor will reveal real world examples of manufacturing and supplier defects that can only be found during HASS testing.
Isn’t HALT vibration really just shock, not vibration? How are Gs of swept sine related?
Understanding the difference between vibration modes are key to the way HALT works. Random vibration and 6 degree of freedom vibration will be explained.
How can I use HALT To Predict the Life of My Product?
This is probably the most frequently asked question of all. An example will be provided that explains this phenomenon in real terms. You will be provided with the instructors approach which has been proven in virtually every case where there is existing field AFR data.
Our products are already shipping, won’t I need to wait for the next generation product development to do HALT?
This is very common misunderstanding. It is actually extremely valuable to run HALT on an existing shipping product for a number of reasons.
One part of my HALT vibration table reads at a different Grms level than another part. Shouldn’t they be exactly the same?
Probably the 2nd most frequently asked question. The instructor will answer this question then proceed to an example of how to qualify the vibration levels on a multiple unit HASS fixture. We will also look at coupling losses and how to work with them.
I already have fixtures designed and in use for my ED shaker testing. Why can’t I use them for HALT?
The way HALT vibration is generated is very different from an ED shaker. The differences will be explained including instantaneous peak head room which is 10X in HALT compared with 3X with ED shakers.
I don’t feel comfortable running HASS, doesn’t HASS remove life from my product?
All cycle fatigue will remove some fractional amount of life. However, HALT, when done properly, extends the expected life of the product. Safety of screen insures that the product can be confidently shipped and still survive well past warranty.
Can I use my HALT fixtures for HASS?
Depending on the product under test and how the HALT fixture is designed, HASS requires the maximum number of units are populated in the chamber at one time. Examples will show how to optimize a HASS fixture.
What stress levels do I start with to design a HASS test profile?
We will look at different product classifications and how much stress is appropriate for our HASS test. The instructor will walk through 3 different product classifications and the correct “Depth of Screen” to apply to each.
About your Instructor:
Aldo Fucinari has 39 years’ experience in design validation testing, electrical engineering and environmental testing and holds a BSCE degree in Computer Engineering. He has worked in various fields of engineering including reliability, verification and validation, process control, quality assurance, systems engineering, hardware, software and product development. He is currently senior consultant for RapidDiscoverySystems.com environmental testing consultants and is partnered with Hobbs Engineering and Quality Testing Services to provide end to end HALT, HASS and specialized environmental testing solutions. Now as an independent environmental reliability-testing consultant, he is involved with world-class companies in bio-medical, computer, consumer and automotive products. Currently he is doing reliability-engineering related work with ophthalmic measurement and surgical devices.
At Seagate Aldo was part of the initial deployment of Seagate’s Design for Six Sigma program where he received certification as a Master Black Belt in DFSS and a Black Belt in Six Sigma process and transactional process.
Aldo has long-term experience with suppliers that are equipped to do full HASS and HASA testing. He is also a leading adopter of lean product development methods and design for manufacturability. He is a senior member of ASQ and a member of the Lean Product and Process Development Exchange.
Cost $200 per person, if you have five or more the cost is $180 per person
Date: Wednesday, August 1, 2018
Time 8:30 am – 10:30 pm Pacific (California)
After registering, you will receive a confirmation email containing information about joining the webinar
View System Requirements